SPN 4335 FMI 3AftertreatmentHighInducement Risk
Aftertreatment 1 DEF Pump Motor — Voltage Above Normal or Shorted High
Scan Tool — in guided session
DVOM Testing — in guided session
Connector Pinout — in guided session
DieselVision™ Upload photos — DieselVision™ reads diagrams, connectors, and screens with precision.
Overview
Fault Code
SPN 4335 / FMI 3
Category
Aftertreatment
Fault Type
actuator
FMI Category
voltage high
Severity
High
Derate Risk
Yes
Regen Inhibit
No
Inducement Risk
Yes — SCR inducement possible
Component Location: DEF pump module — typically mounted near DEF tank or in DEF supply module.
Common Symptoms
- DEF pump motor circuit voltage high
- DEF system pressure fault active
- DEF dosing reduced or inhibited
Root Causes
- DEF pump motor signal wire shorted to voltage
- DEF pump motor internal failure
- Wiring harness damage
- ECM pump driver fault
Full step-by-step tests, DVOM guidance, and pinout data are available inside the AI Diesel Tech diagnostic session.
AI walks you through every test — one step at a time. Plans start at $12.95/mo.
Derate Behavior
Power Derate
Yes
SCR Inducement Risk
If left unresolved, this fault may trigger SCR inducement — a progressive derate enforced by the ECM to ensure emissions compliance.
Mileage / Regen Notes
DEF pump failure common at 300k–500k miles.
System Interactions
SPN 4335 FMI 3 interacts with the following systems and may trigger cascading faults if not resolved promptly.
DPF differential pressure monitoring — soot load calculations affected
SCR NOx conversion efficiency — DEF dosing strategy may be altered
Active regen inhibit logic — regen may be blocked or delayed
Engine protection derate — ECM may reduce power to protect components
TSB Reference: Cummins TSB 4021912 — DEF System Pump Diagnosis
Common Diagnostic Mistakes
Replacing the sensor without verifying wiring continuity and supply voltage first.
Clearing codes without identifying and resolving the root cause — the fault will return.
Ignoring related active faults — cascading faults often share a root cause.
Skipping the connector inspection — corrosion and damaged pins are a leading cause of sensor faults.
Condemning the ECM before exhausting all wiring and component tests.
Replacing the DPF without verifying the regen system is functional — a failed regen injector will reload the new DPF.
Ignoring DEF quality — contaminated DEF causes SCR efficiency faults that look like hardware failures.
OEM Notes
Cummins
X15: DEF pump module is a serviceable assembly. Check DEF quality before replacing pump.
Detroit
DD15: DEF pump diagnosis requires DDDL pump test.
PACCAR
MX-13: Inspect DEF filter before replacing pump — plugged filter causes pump overload.
Related Faults in This Category
OEM System Resources
ASE Training Resources
Diagnostic Engine v7.0
Related Diagnostic Articles
Deep-dive diagnostic page: SPN 4335 FMI 3 — Full FSM Sequence & Repair Steps — includes wiring notes, sensor specs, and gated repair procedures.
Authority References
Diagnostic procedures on this page are informed by OEM service literature and industry standards.
EPA Aftertreatment & Emissions GuidelinesU.S. EPA heavy-duty diesel aftertreatment compliance, DPF/SCR regulations, and NOx standards.Cummins QuickServe OnlineOfficial Cummins service manuals, fault code lookup, and TSB database.Detroit Diesel DiagnoCentralDetroit Diesel diagnostic procedures, DDDL documentation, and service literature.PACCAR MX Engine ServicePACCAR MX-11 and MX-13 engine service documentation and DAVIE diagnostic guides.Volvo/Mack Tech ToolVolvo and Mack engine fault code reference and PTT/Tech Tool diagnostic procedures.ASE — Diesel Truck Technician CertificationNational Institute for Automotive Service Excellence — T2 Diesel Engines certification standards.
Get weekly diesel diagnostic tips
Real-world fault code walkthroughs, wiring tips, and shop-tested fixes — free.
No spam. Unsubscribe anytime.
Get AI-Guided Diagnosis for SPN 4335 FMI 3
The diagnostic engine walks you through every physical test — step by step, on your phone, at the truck. No guessing. No wasted parts.