SPN 3241 FMI 4AftertreatmentMediumRegen Inhibit
Aftertreatment 1 Diesel Particulate Filter Inlet Temperature — Voltage Below Normal
Scan Tool — in guided session
DVOM Testing — in guided session
Connector Pinout — in guided session
DieselVision™ Upload photos — DieselVision™ reads diagrams, connectors, and screens with precision.
Overview
Fault Code
SPN 3241 / FMI 4
Category
Aftertreatment
Fault Type
sensor
FMI Category
voltage low
Severity
Medium
Derate Risk
No
Regen Inhibit
Yes — active regen blocked
Inducement Risk
No
Component Location: DPF inlet temperature sensor — on exhaust pipe upstream of DPF
Common Symptoms
- DPF inlet temp sensor reading low
- Regen inhibited
- DPF temperature monitoring unavailable
Root Causes
- Sensor open circuit
- Wiring open circuit
- Sensor failed
Full step-by-step tests, DVOM guidance, and pinout data are available inside the AI Diesel Tech diagnostic session.
AI walks you through every test — one step at a time. Plans start at $12.95/mo.
Derate Behavior
Power Derate
No
Active Regen Inhibited
This fault prevents the DPF from completing an active regeneration cycle. DPF soot load will increase until the fault is resolved.
Mileage / Regen Notes
Open circuit faults common at 200k–350k miles.
System Interactions
SPN 3241 FMI 4 interacts with the following systems and may trigger cascading faults if not resolved promptly.
DPF differential pressure monitoring — soot load calculations affected
SCR NOx conversion efficiency — DEF dosing strategy may be altered
Active regen inhibit logic — regen may be blocked or delayed
Engine protection derate — ECM may reduce power to protect components
TSB Reference: Cummins TSB 4021923 — DPF Inlet Temperature Sensor Open Circuit
Common Diagnostic Mistakes
Replacing the sensor without verifying wiring continuity and supply voltage first.
Clearing codes without identifying and resolving the root cause — the fault will return.
Ignoring related active faults — cascading faults often share a root cause.
Skipping the connector inspection — corrosion and damaged pins are a leading cause of sensor faults.
Condemning the ECM before exhausting all wiring and component tests.
Replacing the DPF without verifying the regen system is functional — a failed regen injector will reload the new DPF.
Ignoring DEF quality — contaminated DEF causes SCR efficiency faults that look like hardware failures.
OEM Notes
Cummins
X15: Check harness routing near DPF.
Detroit
DD15: Check connector for moisture.
PACCAR
MX-13: Inspect connector boot.
Related Faults in This Category
OEM System Resources
ASE Training Resources
Diagnostic Engine v7.0
Related Diagnostic Articles
Deep-dive diagnostic page: SPN 3241 FMI 4 — Full FSM Sequence & Repair Steps — includes wiring notes, sensor specs, and gated repair procedures.
Authority References
Diagnostic procedures on this page are informed by OEM service literature and industry standards.
EPA Aftertreatment & Emissions GuidelinesU.S. EPA heavy-duty diesel aftertreatment compliance, DPF/SCR regulations, and NOx standards.Cummins QuickServe OnlineOfficial Cummins service manuals, fault code lookup, and TSB database.Detroit Diesel DiagnoCentralDetroit Diesel diagnostic procedures, DDDL documentation, and service literature.PACCAR MX Engine ServicePACCAR MX-11 and MX-13 engine service documentation and DAVIE diagnostic guides.Volvo/Mack Tech ToolVolvo and Mack engine fault code reference and PTT/Tech Tool diagnostic procedures.ASE — Diesel Truck Technician CertificationNational Institute for Automotive Service Excellence — T2 Diesel Engines certification standards.
Get weekly diesel diagnostic tips
Real-world fault code walkthroughs, wiring tips, and shop-tested fixes — free.
No spam. Unsubscribe anytime.
Get AI-Guided Diagnosis for SPN 3241 FMI 4
The diagnostic engine walks you through every physical test — step by step, on your phone, at the truck. No guessing. No wasted parts.