SPN 729 FMI 5Fuel System
Injector Cylinder 6 - Current Below Normal or Open Circuit
Scan Tool — in guided session
DVOM Testing — in guided session
Connector Pinout — in guided session
DieselVision™ Upload photos — DieselVision™ reads diagrams, connectors, and screens with precision.
Overview
Fault Code
SPN 729 / FMI 5
Category
Fuel System
Derate Risk
Yes
Regen Inhibit
No
Inducement Risk
No
Component Location: Cylinder 6 fuel injector is located on the engine head corresponding to the sixth cylinder in the firing order.
Common Symptoms
- Cylinder 6 misfire or rough idle
- White or gray smoke from exhaust
- Loss of power and acceleration
- Increased fuel consumption
- Engine runs rough especially under load
- Check engine light illuminated
Root Causes
- Open circuit in injector solenoid wiring harness Failed fuel injector solenoid for cylinder 6 Corroded or damaged injector connector ECM injector driver circuit failure Chafed or broken wiring between ECM and injector
Full step-by-step tests, DVOM guidance, and pinout data are available inside the AI Diesel Tech diagnostic session.
AI walks you through every test — one step at a time. Plans start at $12.95/mo.
Derate Behavior
Power Derate
Yes
System Interactions
SPN 729 FMI 5 interacts with the following systems and may trigger cascading faults if not resolved promptly.
Fuel rail pressure — injector timing and quantity affected
Engine power output — derate may be triggered to protect injectors
Aftertreatment regen — low fuel pressure can prevent regen completion
Common Diagnostic Mistakes
Replacing the sensor without verifying wiring continuity and supply voltage first.
Clearing codes without identifying and resolving the root cause — the fault will return.
Ignoring related active faults — cascading faults often share a root cause.
Skipping the connector inspection — corrosion and damaged pins are a leading cause of sensor faults.
Condemning the ECM before exhausting all wiring and component tests.
Replacing injectors without verifying fuel supply pressure — low supply pressure causes injector faults.
Ignoring fuel filter restriction — a clogged filter causes low rail pressure that mimics injector failure.
Related Faults in This Category
OEM System Resources
ASE Training Resources
Diagnostic Engine v7.0
Related Diagnostic Articles
Deep-dive diagnostic page: SPN 729 FMI 5 — Full FSM Sequence & Repair Steps — includes wiring notes, sensor specs, and gated repair procedures.
Authority References
Diagnostic procedures on this page are informed by OEM service literature and industry standards.
Cummins QuickServe OnlineOfficial Cummins service manuals, fault code lookup, and TSB database.Detroit Diesel DiagnoCentralDetroit Diesel diagnostic procedures, DDDL documentation, and service literature.PACCAR MX Engine ServicePACCAR MX-11 and MX-13 engine service documentation and DAVIE diagnostic guides.Volvo/Mack Tech ToolVolvo and Mack engine fault code reference and PTT/Tech Tool diagnostic procedures.ASE — Diesel Truck Technician CertificationNational Institute for Automotive Service Excellence — T2 Diesel Engines certification standards.EPA Aftertreatment & Emissions GuidelinesU.S. EPA heavy-duty diesel aftertreatment compliance, DPF/SCR regulations, and NOx standards.
Get weekly diesel diagnostic tips
Real-world fault code walkthroughs, wiring tips, and shop-tested fixes — free.
No spam. Unsubscribe anytime.
Get AI-Guided Diagnosis for SPN 729 FMI 5
The diagnostic engine walks you through every physical test — step by step, on your phone, at the truck. No guessing. No wasted parts.