Camshaft Position Sensor A Circuit Intermittent (Bank 2)
Common Symptoms
- Check Engine Light illuminated
- Engine cranks but may not start or starts with difficulty
- Rough idle or engine misfires
- Loss of power or hesitation during acceleration
- Engine stalls intermittently
- Poor fuel economy
Most Likely Root Causes
- Faulty or failing camshaft position sensor
- Damaged or corroded wiring harness or connectors
- Intermittent open or short circuit in sensor wiring
- Poor electrical connection at sensor or ECM
- Timing chain or belt wear affecting reluctor wheel signal
Full step-by-step tests, DVOM guidance, and pinout data are available inside the AI Diesel Tech diagnostic session.
AI walks you through every test — one step at a time. Plans start at $12.95/mo.
Component Location
The camshaft position sensor for Bank 2 is typically mounted on the cylinder head or timing cover near the camshaft on the side opposite the Bank 1 sensor.
Manufacturer Notes
Some manufacturers have known issues with camshaft position sensor connectors becoming loose or corroded over time causing intermittent faults.
Also diagnosing J1939 SPN/FMI codes?
Heavy-duty trucks often throw both OBD-II and J1939 faults simultaneously. AI Diesel Tech handles both protocols in a single guided session.
AI Diesel Tech — The Technician's Diagnostic Engine
AI Diesel Tech diagnostic logic is built by an ASE Certified Diesel Technician. Professional-grade OBD-II and J1939 fault analysis — trusted by technicians nationwide, used in shops, fleets, and training programs.
Get AI-Guided Diagnosis for P0349
The diagnostic engine walks you through every physical test — step by step, on your phone, at the truck.