Common Symptoms
- Check engine light illuminated
- Reduced engine power or turbo boost
- Poor acceleration or sluggish throttle response
- Engine runs in limp mode
- Rough idle or hesitation under load
- Increased fuel consumption
Most Likely Root Causes
- Faulty turbocharger boost pressure sensor B
- Damaged or corroded wiring harness to boost sensor
- Poor electrical connection at boost sensor connector
- Shorted sensor signal wire to ground
- Failed engine control module
Full step-by-step tests, DVOM guidance, and pinout data are available inside the AI Diesel Tech diagnostic session.
AI walks you through every test — one step at a time. Plans start at $12.95/mo.
Component Location
Boost pressure sensor B is typically mounted on the intake manifold or charge air piping downstream of the turbocharger.
Manufacturer Notes
Some manufacturers use dual boost sensors for redundancy and plausibility checking in turbocharged engines.
Also diagnosing J1939 SPN/FMI codes?
Heavy-duty trucks often throw both OBD-II and J1939 faults simultaneously. AI Diesel Tech handles both protocols in a single guided session.
AI Diesel Tech — The Technician's Diagnostic Engine
AI Diesel Tech diagnostic logic is built by an ASE Certified Diesel Technician. Professional-grade OBD-II and J1939 fault analysis — trusted by technicians nationwide, used in shops, fleets, and training programs.
Get AI-Guided Diagnosis for P0241
The diagnostic engine walks you through every physical test — step by step, on your phone, at the truck.