Crankshaft Position — Camshaft Position Correlation (Bank 2 Sensor A)
Common Symptoms
- Check engine light illuminated
- Rough idle or engine misfire
- Hard starting or no-start condition
- Reduced engine power or hesitation
- Poor fuel economy
- Engine stalling at idle
Most Likely Root Causes
- Timing chain or belt stretched or jumped timing
- Failed or failing camshaft position sensor
- Failed or failing crankshaft position sensor
- Variable valve timing solenoid malfunction
- Low engine oil level or incorrect oil viscosity
Full step-by-step tests, DVOM guidance, and pinout data are available inside the AI Diesel Tech diagnostic session.
AI walks you through every test — one step at a time. Plans start at $12.95/mo.
Component Location
Camshaft position sensor Bank 2 is typically located on the cylinder head or timing cover on the side of the engine opposite the Bank 1 sensor.
Manufacturer Notes
Many manufacturers recommend verifying correct engine oil viscosity and VVT solenoid screen condition before replacing timing components.
Also diagnosing J1939 SPN/FMI codes?
Heavy-duty trucks often throw both OBD-II and J1939 faults simultaneously. AI Diesel Tech handles both protocols in a single guided session.
AI Diesel Tech — The Technician's Diagnostic Engine
AI Diesel Tech diagnostic logic is built by an ASE Certified Diesel Technician. Professional-grade OBD-II and J1939 fault analysis — trusted by technicians nationwide, used in shops, fleets, and training programs.
Get AI-Guided Diagnosis for P0018
The diagnostic engine walks you through every physical test — step by step, on your phone, at the truck.